PMM’s range of EMC/RFI equipment includes pre-compliance and full compliance conducted and radiated emission receivers with tracking and FFT spectrum analysis, and line impedance stabilisation network systems (LISNs). Receivers such as the
PMM 9010F (10 Hz to 30 MHz) with FFT offer significant full-compliance benefits and speed of analysis, as well as expandability in frequency range into 6 GHz bandwidth and beyond by means of PMM’s system of antenna-mounted amplifiers feeding into a dedicated connector on receiver front panels. .

Westek Electronics is a leading Australian-owned Company specialising in EMC/RFI compliance equipment, components and instrumentation. Westek Electronics’range of products includes test systems for OATS, shielded room systems, GTEM cells, and instrumentation for electrostatic susceptibility testing. Westek electronics also supplies high insertion loss filtering components for RFI/EMC isolation. For further information, please contact us.

The post PMM appoints Westek for compliance equipment first appeared on Westek Electronics.

The PMM 9010F fast, digital EMI receiver provides gapless conducted interference measurement from 10 Hz to 30 MHz in full compliance with CISPR 16-1-1. The receiver can be upgraded to 30 MHz – 3 GHz; 30 MHz – 6 GHz; and 6 – 18 GHz, providing a long-term investment value.

The PMM 9010F fast, digital EMI receiver with FFT reduces full compliance testing significantly from the traditional hours involved, scanning the conducted spectrum under 25 seconds with a hold time of only one second for CISPR detectors including Q-Peak, C-RMS, and C-Avg (utilising an effective ¼ resolution bandwidth step). The PMM 9010F EMI receiver is equipped with Peak, Quasi-Peak, RMS, RMS-avg, and C-avg detectors.

The PMM 9010F receiver has a high contrast, backlit display with a large range of display units to choose from. Built-in display limits include CISPR 11, 14, and 22 limits, and also shows battery status. The I/O interfaces include RS232, USB, high speed optical, and a user port driving accessories.

Important options available for the PMM 9010F fast, digital EMI receiver with FFT include MIL-STD-441 resolution bandwidth filters, a full-compliance, click analyser function (to CISPR 14-1), and a RS232 to BlueTooth converter.

The PMM 9010F fast, digital EMI receiver with FFT advanced design confers a very low noise floor, eg:-7dB?V in the A band (9 – 150 kHz) and 5dB?V in the B band (0.15 – 30 MHz). When higher sensitivity is required, the noise floor can be reduced to –24dBmV in the A band, and –7dBmV in the B band.

PMM’s software package (PES) is suitable for real-time analysis, saving, recalling, editing settings, limits, scans, etc. The software also drives ancillaries such as PMM’s LISN and RF switches.

Ancillary equipment includes a 3-axis loop antenna suitable for CISPR 15 (EN551015), rod antenna (9-30 kHz), bi-conical antenna (30 – 200 MHz), and double-ridged antenna (6 – 18 GHz), and an extensive range of LISNs for single phase and three-phase supplies.

For further information, please contact us.

The post PMM 9010F fast, digital EMI receiver first appeared on Westek Electronics.