Manual Method vs. Automated Solution:
The manual method is extremely problematic: slow, error-prone, labor-intensive, and hazardous for the operator – don’t even think about recording the test results manually. The 964i, on the other hand, is purpose-built to fully automate all your high-voltage switching needs. Choose the 964i, pair it with a Vitrek 95X Series Industrial Strength Hipot Tester and QuickTest Pro test automation software. Your company could win the Malcolm Baldridge National Quality Award, and you might get that promotion and the corner office you’ve always wanted. Choose carefully.
Key Features of the Vitrek 964i:
Capacity: Holds up to 8, eight-channel HV switching cards, supporting up to 64 test points in a single mainframe. Multiple units can be combined to increase capacity.
Versatility: Whether testing an 8-pin connector, a 64-conductor cable, or a tray of SMD capacitors, the 964i routes test points to your tester automatically.
Configuration: Select from four different voltage ratings – 3KV, 7KV, 10KV, and 15KV. Choose the number of cards needed and the input for each card (+ HV bus or – return bus).
Ease of Use: Standard front inputs connect directly to your Hipot/Continuity Tester, with up to 60 rear panel terminals for your test fixture or DUT. The system can be controlled by a single Vitrek 95X or V7X Series Hipot Tester or up to 10 units via PC through the built-in RS232 port or available GPIB interface. The LCD display confirms system status and switch activation.
Advantages of the 964i High Voltage Switching Scanner:
The Vitrek 964i High Voltage Automated Test Switching System routes high voltage test signals and return signals to any desired test points. This unique capability gives you control over each individual relay, unlike typical cable testers that restrict you to a fixed pattern. With available mux cards, you can also access the matrix with other equipment such as an LCR meter or DMM. The result is a highly repeatable, rapid switching test system with no operator intervention and fully automated data acquisition. With voltage switching capability up to 15,000 volts or current switching as high as 40 amps, the 964i can handle just about any test requirement. Give it a try, and you will never switch back to manual testing again.
Pre-Configured Systems:
Vitrek 964i High Voltage Switching System – 964i-8X2MX
Pre-built 964i with 2xHV7-8 (1 White, 1 Black) Cards and a Hipot/Cont Mux Card.
Includes: Interconnect Lead Set, Chassis Grounding Cable, VICL-2, 8xHVC-MW, 8xHVC-MB, External Power Supply, Operating Manual, Certificate of Quality.
Vitrek 964i High Voltage Switching System – 964i-16X2MX
Pre-built 964i with 4xHV7-8 (2 White, 2 Black) Cards and a Hipot/Cont Mux Card.
Includes: Interconnect Lead Set, Chassis Grounding Cable, VICL-2, 16xHVC-MW, 16xHVC-MB, External Power Supply, Operating Manual, Certificate of Quality.
Vitrek 964i High Voltage Switching System – 964i-24X2MX
Pre-built 964i with 6xHV7-8 (3 White, 3 Black) Cards and a Hipot/Cont Mux Card.
Includes: Interconnect Lead Set, Chassis Grounding Cable, VICL-2, 24xHVC-MW, 24xHVC-MB, External Power Supply, Operating Manual, Certificate of Quality.
Custom Configured Systems:
964i Hipot High Voltage Switching System Mainframe (No cards included)
Includes: Interconnect Lead Set, Chassis Grounding Cable, VICL-2, External Power Supply, Operating Manual, Certificate of Quality.
LV3-MX2: 3kV Dual Input (HV/Cont) Single Output (+) Bus.
HV7-MX2: 7kV Dual Input (HV/Cont) Single Output (+) Bus.
LV3-8R: 3kV Single Input Bus 8 Output Card with Red Banana Jack Terminals. Includes: 8xRed Male Sheathed Banana Connectors.
LV3-8B: 3kV Single Input Bus 8 Output Card with Black Banana Jack Terminals. Includes: 8xBlack Male Sheathed Banana Connectors.
LV3-8S: 3kV Two Single Input Bus 4 Output Card with Black and Red Banana Jack Terminals. Includes: 4xRed Male Sheathed Banana Connectors and 4xBlack Male Sheathed Banana Connectors.
HV10-MX2: 10kV Dual Input (HV/Cont) Single Output (+) Bus.
HC-4B: 4 Channel 30A Source & Sense Relay Card, Black.
HC-4R: 4 Channel 30A Source & Sense Relay Card, Red.
HV15-MX2: 15kV Dual Input (HV/Cont) Single Output (+) Bus.
HC-7B: 4 Channel 70A Source & Sense Relay Card, Black.
HC-7R: 4 Channel 70A Source & Sense Relay Card, Red.
HV7-8W: 7kV Single Input Bus 8 Output Card with White HV Terminals. Includes: 8xHVC-MW.
HV7-8B: 7kV Single Input Bus 8 Output Card with Black HV Terminals. Includes: 8xHVC-MB.
HV7-8S: 7kV Dual Single Input Bus 4 Output Card with Black and White HV Terminals. Includes: 4xHVC-MW and 4xHVC-MB.
HV10-8W: 10kV Single Input Bus 8 Output Card with White HV Terminals. Includes: 8xHVC-MW.
HV10-8B: 10kV Single Input Bus 8 Output Card with Black HV Terminals. Includes: 8xHVC-MB.
HV10-8S: 10kV Dual Single Input Bus 4 Output Card with Black and White HV Terminals. Includes: 4xHVC-MW and 4xHVC-MB.
HV15-8W: 15kV Single Input Bus 8 Output Card with White HV Terminals. Includes: 8xHVC-MW.
HV15-8B: 15kV Single Input Bus 8 Output Card with Black HV Terminals. Includes: 8xHVC-MB.
HV15-8S: 15kV Dual Single Input Bus 4 Output Card with Black and White HV Terminals. Includes: 4xHVC-MW and 4xHVC-MB.
964i High Voltage Switching System Accessories:
HVW-20: Bulk 20kV Rated 18 AWG Test Lead Wire.
HVW-50: Bulk 50kV Rated 22 AWG Test Lead Wire.
HVC-MW: Male HV Mating Connector, White.
HVC-MB: Male HV Mating Connector, Black.
HVC-FW: Female HV Panel Mount Connector, White.
HVC-FB: Female HV Panel Mount Connector, Black.
VICL-2: Replacement Vitrek Hipot Communication Cable, 7ft.
TL-HVW: 20kV Rated 18 AWG Test Lead 4ft, MVC-MW to Alligator Clip.
TL-HVB: 20kV Rated 18 AWG Test Lead 4ft, MVC-MB to Alligator Clip.
RS-2: Female to Female Null Modem RS232 (Serial) Cable 6ft.
PB-47: Replacement test lead kit with 20kV rated direct input HV test lead, common input lead (both 4 ft, terminated in alligator clips), and a 6 ft chassis grounding lead.
RM-1: Rack Mount Kit.
USB-2: USB A to RS232 (Serial) Adapter Cable (Requires RS-2).
GP-1: 1 Meter Shielded GPIB (IEE-488) Cable.
GP-964: GPIB Interface Option for the 964i.
598-8012: Test lead assembly, #18AWG white 48/HVC-MW/HVC-MW.
Choose the Vitrek 964i for a seamless, automated high-voltage switching experience, eliminating the risks and inefficiencies