To ensure the reliability and compliance of electronic and electrical devices with international standards, magnetic field generators and analyzers are essential for simulating and analyzing magnetic fields. Below are detailed descriptions of our key products and their applications:
During operation, electronic and electrical devices, systems, and equipment should not be affected by electromagnetic phenomena. Burst testing assesses devices’ tolerance to voltage peaks with high repetition frequencies, high amplitude, short rise time, and low energy. Our burst generators allow you to test immunity to interference in accordance with IEC 61000-4-4 standards, from 125 kHz to 2 MHz, far beyond standard requirements.
BNB 8651-40 – Battery Simulator The purpose of this battery impedance network (BNB) is to provide electric power to the device under test, providing a standard impedance. It has been
L1-150M & L1-150M1 150 A Multi-standard Single Line 10 kHz – 400 MHz The L1-150M and L1-150M1 are high-performance, single-line Line Impedance Stabilization Networks (LISNs) designed for conducted interference testing.
DGA 9552 N DGA 9552 N is a bidirectional attenuator, i.e. the attenuation and power capability specification is valid for both directions.There is a large variety of applications for this
CDNE M2 CDNE with tight tolerances for CISPR 15 emission measurements with 2 mains conductors can also be used as CDNE AF2. Datasheet CDNE M2 CA CDNE M2 Part A
AK 9513 50 Ohm Coax. Cable with N plugsIndividual lengthUsable up to 3 (5) GHzIndiv. Cal. possible if cable longer than 3 mStandard lengths: 3 m, 5 m, 10 m
VUFM 1670 E-Field Meter70 kHz-2.5 GHz1V/m-300V/mLinear Polarizedcharger ACS 110 required Datasheet VUFM 1670 VUFM 1671 LCD-Display Unit for VUFM 1670with 5 m fibre optical linkcharger ACS 110 required Datasheet VUFM
Coupling and Decoupling Networks CDNs for Immunity Testing (10 kHz to 400 MHz) Type Coupling / Feature CDN Coupling and decoupling networks for frequencies: 150 kHz – 230 MHz (IEC
Coupling Networks / Decoupling Networkst Grid Applications / 3-Phase Type Rated Current Coupling/Feature CWG 520 4 x 16 A Surge + Burst / Standard Connecting Cables / Only Surge Test
CDN | Coupling / Decoupling Network Burst 3-Phase CDN Type Rated Current Characteristics CWG 520 3-phase CDN 4 x 16 A For burst and surge tests with burst generator SFT
Schlöder’s conducted interference immunity devices offer reliable and comprehensive solutions for testing the immunity of your systems to high-frequency and low-frequency disturbances. Whether for continuous or short-term disturbances, our products ensure compliance with global EMC standards and enhance the reliability of your electronic and electrical systems.
In operation, powerful components with high levels of interference and highly sensitive electronics are often operated close to one another. Voltage fluctuations or HF and LF signals should not cause any impairments, such as permanent or temporary malfunctions. During tests for conducted interference immunity, the test device’s immunity to such interference is assessed by coupling interference onto supply or signal lines.
