1. Mast Adapter

Antennas can be mounted directly to the 3/8″ thread of the telescopic part or can be using the adapters shown above.

For more information please refer to the respective data sheets of the adapters.

2. Telescope

The modular telescopic parts are interchangeable. So different height adjust-ments can be realized.

 When selecting the telescope, please make sure that an additional vertical offset may be caused by
the mast foot and the optional wheels.

3. Mast Foot

 AM 9144 M-VA 
Height offset: +10 cm

The mast made of stainless steel fits for all AM 9144 T – models. With its adjustment screws strongly
 uneven ground can be compensated. A rotating star can lock the legs.

AM 9144 M-GFK 
Height offset: +5 cm

The low-reflection mast foot made of fiberglass is suitable for all AM 9144 T models. With its adjustable
  rubber feet slightly uneven ground can be compensated. Due to the simple plug-in system the mast
  foot set up is quick and easy.

AM 9144 M-TILT 
Height offset: +14 cm

The tiltable mast is suitable for all AM 9144 T – models. With the hand wheel, the entire mast ca be tilted.
 This is necessary as otherwise a polarization change of the antenna, due to the an-tenna elements, would not be possible.
  Tilt angle: > 20°
  With its adjustment screws strongly uneven ground can be compensated. A rotating star can lock the legs.

AM 9144 M-FIX 
Height offset: +1 cm

The mast foot made of zinc-plated steel fits for all AM 9144 Telescope elements, e.g. AM 9144 T-12.
 Designed for rigid attachment to the floor by three M8 Cross-handle screws, the required threaded hole length is 30 mm.

4. Wheels

AM 9144 W-VA
Height offset: + 5 cm 

The wheel are suitable for the stainless steel mast foot AM 9144 M-VA. They are simply attached instead of the end caps
into the legs and are locked with the star handle screw. With the parking brake the mast remains in position.

 AM 9144 W-GFK
Height offset: + 5 cm

These wheels are suitable for the GFK mast foot AM 9144 M-GFK. The wheels are simply assembled instead of the rubber feet.
With the parking brake the mast remains in position.

5. Extender

 The Extender is screwed by its 3/8 “female threads on top of the telescopic part and extends it.
The length of the extender is made in a way so that a stepless height adjustment remains possible.
The resulting height of a retracted telescope with extender corresponds to the height of a completely extended telescope.

Overall height adjustment in different configurations

Mast Foot	Wheels	Telescope
		AM 9144 T-05		AM 9144 T-08		AM 9144 T-09		AM 9144 T-12
		min.	max.	min.	max.	min.	max.	min.	max.
VA	no wheels	61.5	105	77.5	137	89.5	161	111	205
	wheels	66.5	110	82.5	142	94.5	166	116	210
GFK	no wheels	56.5	100	72.5	132	84.5	156	106	200
	wheels	61.5	105	77.5	137	89.5	161	111	205

 When using an extender, the height adjustment range is increased depending on the length.
This should be considered when calculating the total height adjustment range.