FSH3D
Isotropic H-Field Antenna for the Rohde und Schwarz handheld spectrum analyser FSH or the TS-EMF System.
• 9 kHz – 200 (300) MHz
• Light weight low attenuation radom
• Outer diameter ca. 150 mm
The selection of the active loop and the power supply for the antenna is provided by the included short cable that can directly be connected to the R&S FSH.
FSE3D
Isotropic E-Field Antenna for handheld spectrum analyser.
• Frequency range: (10) 30 MHz – 3 (3.3) GHz
• Light weight low attenuation radom
• Outer diameter approx. 150 mm
The FSE3D consists of three identical, active broadband dipoles, which are aligned perpendicularly to each other. A shielded unit follows, containing the switching and amplifier circuitry, which is directly connected to the N-male output and fed by the USB-connector with power supply and data-signals to select the desired loop-axis. A RF-transparent radome cover protects the FSE3D from dust and moisture. Because of its light-weight construction the FSE3D can be directly mounted to the spectrum analyzer. Alternatively the FSE3D can be held manually at its 50 mm shaft (sweeping method) or attached to a mast or tripod using the 22 mm tube (rotation method or raster method).
FSHPH
H-field probe for handheld spectrum analyzer of all main manufacturer.
Usable with the following devices:
• Rohde und Schwarz FSH-Serie
• Keysight Fieldfox
• Anritsu Sitemaster, LMR-Master, Spectrum Master
• Aeroflex 9100 Handheld Spectrum Analyzer Series
• and many more…
9 kHz – 300 MHz
The FSHPH is a passive, single-axis H-field probe suited for non-ionizing radiation measurements according to BGV-B11, ICNIRP, IEEE C95.1, FCC 96-236 and others. The FSHPE allows a fast andaccurate safety-evaluation of the measurement environment.
FSHPE
E-field probe for handheld spectrum analyzer of all main manufacturer.
Usable with the following devices:
• Rohde und Schwarz FSH-Serie
• Keysight Fieldfox
• Anritsu Sitemaster, LMR-Master, Spectrum Master
• Aeroflex 9100 Handheld Spectrum Analyzer Series
• and many more…
9 kHz – 200 (300) MHz
The FSHPE is a passive, single-axis E-field probe suited for non-ionizing radiation measurements according toBGV-B11, ICNIRP, IEEE C95.1, FCC 96-236 and others. The FSHPE allows a fast an accurate safety-evaluation of the measurement environment.