Features:
Voltage & Power Ratings: Supports up to 1250V and 60kW.
Control & Display: Integrated control panel with options for Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), and Dynamic modes.
Memory Functionality: Stores and recalls up to 150 sets of load configurations for efficient testing.
Remote Control Interfaces: Compatible with GPIB, RS232, USB, and LAN for remote operation.
Short Circuit Testing: Features settings for SHORT_VH and SHORT_VL, with the ability to measure short voltage and current.
Dynamic Simulation: Allows dynamic simulation under CC and CP modes with adjustable rise/fall slew rates and external signal input for arbitrary waveform generation.
Efficiency in Testing: One-key functionality for Over Current Protection (OCP) and Over Power Protection (OPP) tests to enhance testing accuracy.
Programmable Load Control: Programmable ON/OFF voltage settings and GO/NG meter checks. The display for voltage can show positive or negative polarity.
Support for Solar Testing: Supports Maximum Power Point Tracking (MPPT) tests for solar panels.
Built-in Soft Start: No external soft start circuit required, streamlining connection to the unit under test (UUT).
Parallel Operation: Up to 8 units can be controlled in master/slave configuration.
High-speed Measurement: Features a 5-digit meter for voltage, current, and power with simultaneous display.
Enhanced Protection Features: Includes over-voltage, over-current, over-temperature alerts, and protections against current, power, and temperature limits.
Applications:
Voltage/Current source for various testing scenarios.
Testing for SMPS (Switched-Mode Power Supply) transient response.
Constant voltage/current limit testing and battery emulation.
Battery charging and discharging.
R&D quality control and automated test equipment (ATE) systems.
Production testing.
Technical Specifications:
| Model | Voltage Range | Current Range | Power Rating | Dimension (HxWxD) | Weight |
| 36350E | 0 ~ 1250V | 0 ~ 250A | 50kW | 1353x853x766mm | 510 kg |
| 36360E | 0 ~ 1250V | 0 ~ 300A | 60kW | 1249x853x766mm | 630 kg |
Power Read Back Specifications:
Accuracy: ±(0.1% of setting + 0.2% of range)
Resolution: Power consumption up to 480kW.
Environmental Conditions:
Operating Temperature: 0 ~ 40°C
Humidity: 20 ~ 85% relative humidity.
Storage Temperature: -20 ~ +70°C.
Options:
Additional interfaces: GPIB, RS232, USB, LAN cards.
External I/O & analog control options.